Commercial Furniture Center

Print Page | Send to a Friend | Bookmark

Product Maintenance

Commercial Furniture Center furniture is designed with customer satisfaction, beauty and long lasting quality in mind. To ensure maximum durability and longevity of our high-end furniture, periodic inspection and maintenance is required.

Customers should inspect merchandise every 3 months - joints, swivels, corner blocks, welds, glides and other points of stress. Also make sure to clean and tighten screws and bolts. Grease parts where necessary. If product becomes unstable remove from service immediately. Note: Warranty will be voided if proper maintenance procedures were not followed.

Special Care Instructions:

Tables - Do not use dishes with unglazed bottoms without tablecloths. They will scratch the tables and damage them.

Cleaning Instructions:

Wood Finishes - use a liquid cleaner wax polish to retain luster as well as cleanliness. Keep away from water contact.
Chrome Finishes - Use a non-abrasive glass cleaner to remove dirt and fingerprints.
Powder Coat and Wrinkled Finishes - use a damp cloth to remove smudges and dirt. For stubborn stains, soap and water may be used. With powder coat finish use touch up paint on chips to prevent further chipping.
Laminate - Wipe surface with liquid soap and water regularly. Stubborn stains could be removed with a paste of baking soda and water. Rinse thoroughly after use. Do not use abrasive cleaners. Apply a self cleaning wax for regular maintenance and shine.
Upholstery Fabric and Vinyl cleaning and maintenance instructions are in our fabric/vinyl section.
Teak Wood - Due to exposure to the sun, the natural oils migrate to the surface of the wood. The sun oxides this oil and turns the surface a silver-gray color. It is recommended once every 3-4 weeks to wipe/brush onto the wood Teak Oil (available at local hardware stores). This prevents surface roughness, checking (cracks along the grain of the wood), mildew, fungus and discoloration.

Return to Help Center

Search